General; Subject To Modifications; General Warnings; Technical Specifications - Mark PinTherm Infra II Technisches Handbuch

2.0 General

2.1 Subject to modification
The manufacturer is continuously striving to improve its products and reserves the right to make
changes in the specifications without prior notice. The technical details are assumed to be correct,
but do not form the basis for a contract or guarantee. All orders are accepted on the standard
terms of our general conditions of sale and delivery (available on request).
2.2 General warnings
Installation must meet the current local and/or national regulations. The PinTherm Infra II must
therefore be installed by a competent and qualified fitter, in compliance with the national and
international legislation. In the event of faulty installation, calibration, modification, maintenance or
repair, the guarantee shall cease to apply.
3.0 Technical specifications
3.1 PinTherm Infra II technical details
• Type name
• Item number
• PinTherm Infra II power supply : 230Vac/50Hz
• Clock
• Switching programs
• Connection difference
• Dimensions
• Weight
• Degree of protection
• Ambient temperature
• Circuit contact(s)
• Temperature setting
• Overtime timer
• Calibration
• High/low switching
• Sensor
• Language options
3.2 Technical details for external globe sensor
• Type name
• Item number
• Resistance
• Dimensions
• Weight
• Electrical connection
• Degree of protection
6
: PinTherm Infra II
: 06 29 092
: 24-hour clock with automatic summer/winter-time
change-over
: 3 switching programs a day
: 1°C
: 166 x 160 x 106mm (l x w x h)
: 880 gram
: IP-54
: 0-40º
: 230Vac/10(4)A
: 0 to 39°C per 1°C adjustable
: adjustable to 1, 2 or 3 hours (060, 120, 180)
: adjustable from -3.5°C to +3.5°C
: At temperature 1K, 2K, 3K or manual
The PinTherm Infra II always starts 20 min at high when
heat is requested.
: external globe (06 29 087)
: NL/EN/DE/FR/IT/PL/RO/LT
: RSTF NTC4,7K
: 06 29 087
: NTC 4K7
: 79 x 81 x 26mm (l x w x h)
: 46 gram
: 0.75 -1.5mm²
: IP-30