Using An Extension Cable; Package Contents; Intended Use - DeWalt DWE4377 Bersetzt Von Den Originalanweisungen

EnGLIsh
Additional Safety Rules for Grinders
a ) Do not use Type 11 (flaring cup) wheels on this tool.
Using inappropriate accessories can result in injury.
b ) Always use side handle. Tighten the handle securely.
The side handle should always be used to maintain control
of the tool at all times.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot
during operation.
• Risk of personal injury due to prolonged use.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Backing flange
1 Threaded clamp nut
36
1 Keyless clamp nut
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Date Code Position (Fig. C)
The date code
is printed into the housing.
Example:
WALT
e
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Spindle
1
Spindle lock button
2
Unthreaded backing flange
3
Threaded locking flange
4
Side handle
5
Guard
6
Guard release lever
7
Trigger switch
8
Trigger lock off
9
LED Indicator
10
Variable speed dial
11

Intended Use

2 ; the
Your heavy-duty small angle grinder has been designed
for professional grinding, sanding, wire brushing and
cutting applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your heavy-duty angle grinder is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Electronic Brake
20 , which also includes the year of manufacture,
2018 XX XX
Year of Manufacture