Using The Sensors Correctly; Cooking Zone Data; Pot Recognition; Switching The Hob On And Off - hanseatic HHI63BAF-CZ Gebrauchsanleitung

Page EN-14 Using and caring for the hob

Using the sensors correctly

Your hob is operated using sensors. They are
very sensitive and will react even when you
move your fingers closer. You can therefore
find some tips on correct sensor operation
here.
• When touching the sensors, only use the
entire fingertip and not just the very end
of the fingertip.
• When touching a sensor, do not apply any
pressure.
• Only ever touch one sensor.
• Ensure that none of the sensors are cov-
ered (e.g. by a potholder).
When a sensor is touched, an acoustic signal
will sound.

Cooking zone data

Cookware
Cooking
dimensions in
zone
mm
Rear left 160–210
Front left 140–210
right 180–290

Pot recognition

Pot recognition is installed in the cooking
zones. Pot recognition ensures that the cook-
ing zones will be activated only if there is a pot
with a ferromagnetic base or another object
made of the same kind of metal located there.
The cooking zone becomes inactive as soon
as the pot or the magnetic object is removed.

Switching the hob on and off

To switch
• the hob on, touch the
A beep will sound. "
all of the indicator displays.
• the hob off,
– do nothing. If you do not touch a sensor
within 60 seconds of switching the hob
on, it will switch off automatically.
max. output
– touch the
in W
The hob will switch off. An audible sig-
nal will be heard; all of the LED displays
2400/2600
except for the residual heat displays "
1400/1500
will go out.
3000/3600
On/Off sensor (6).
" or " " will appear in
– – –
On/Off sensor once again.
"
K