Cleaning And Maintaining The Hob . En - hanseatic HHI63BAF-CZ Gebrauchsanleitung

The red dot next to the cooking zone indicator
shows that a cooking time limit has been set
for these cooking zones.
A flashing dot means that the timer indicator
is showing the cooking time limit for this cook-
ing zone. For this cooking zone, the lowest
cooking time limit is currently set.
5
Cooking zone 1
Once the set time has elapsed, cooking
zone 2 will switch off automatically and the
residual heat indicator "
red dot will start to flash next to the indicator
for cooking zone 1.
5
The timer indicator will now show the remain-
ing time for cooking zone 1.
H
Once the set time has elapsed, cooking zone
1 will switch off automatically and the residual
heat indicator " " will light up.
H
If a kitchen timer and a cooking time
limit are set at the same time, this may
result in the red dot next to the cooking zone
indicator not flashing. In this case, the lowest
time is assigned to the kitchen timer and is
shown accordingly in the timer indicator.
H
Cooking zone 2
" will light up. The
H
Using and caring for the hob
Cleaning and maintaining the
hob
CAUTION
Risk of burns!
Improper handling may lead to burns.
■ Allow the cooking zones to cool com-
pletely before cleaning. Exception: If
you would like to remove food resi-
dues containing sugar or starch, plas-
tic or aluminium foil (see below).
NOTICE
Risk of damage!
■ For cleaning purposes, do not use
any harsh cleaning agents or scour-
ing powders, steel wool, oven sprays,
steam cleaners or high-pressure
cleaners! They can damage the sur-
face. High-pressure cleaners can
cause a short circuit.
• Clean and maintain the hob regularly
with a special care product containing a
special impregnating oil for glass ceramic
hobs. Such products can be found in spe-
cialist shops.
Slight soiling which is not burnt on
• After the appliance has cooled, use a
damp cloth with no cleaning agent to wipe
away dirt. Then dry the surface with a soft
cloth to prevent lime stains.
• Light-coloured stains with a pearly tint
(aluminium residues, e.g. from alumin-
ium foils) can be easily removed with a
cleaning agent specially designed for this
purpose and available from specialist
dealers.
Page EN-21