Installation; Tools Required - Samson KMA 495 Originalbetriebsanleitung

Original Betriebsanleitung:
Translation of the original operating instructions:
KMA 495
5.

Installation

Danger!
Danger of injury through high pressure!
Pressure acting on lines and valves may cause severe injuries!
Before disconnecting any lines and valves, the pressure must be switched off and the lines must be vented.
Danger of injury through electric shock!
Shut off current and secure against unauthorized activation.
Warning!
Danger of injury in case of incorrect assembly!
Incorrect assembly may cause severe injuries.
Assembly and installation must only be performed by authorized expert staff.
Secure plant against unauthorized activation!
Guarantee controlled restart after shut down!
5.1.

Tools required

The tools required for mounting and installation of the device are not included in the scope of delivery:
Only use functional, suitable and safe tools!
© 2018 SED Flow Control GmbH, Bad Rappenau 32 BA180001; Version a vom 24.07.2018