Features And Technical Specifications - Comet KL 1680 GOLD PLUS Bedienungs- Und Wartungsanleitung

is authorised to carry out special maintenance and repairs on the water cleaner. Any work on is electrical
parts must be carried out by a Skilled Technician who is also a Qualified Eletrician, i.e. a person with
professional training who is authorised to check, install and repair electrical equipment correctly and
according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of its
operation.

2 FEATURES AND TECHNICAL SPECIFICATIONS

ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse
HYDRAULIC CONNECTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
PERFORMANCE
Water flow
Maximum pressure
Recoil of cleaner gun
Sound level
Operator arm vibrations
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Detergent bottle capacity
All features and technical specifications are only indications. The Manufacturer reserves the right to modify
2.1 I
dEntIFIcatIon oF
Please also refer to figures 1 to 4, which are
located at the start of these operating and
maintenance instructions.
1 Electric power cord
2 Main switch
3 Handling bar
4 Housing for water gun / lance hose
5 Warning notice
6 Hose reel
7 Identification plate
8 Water outlet connector
9 Housing for foaming lance
20
the appliance as it deems necessary.
c
oMponEnts
Gold Plus
230 V / 1~ 50 Hz
50 °C / 122 °F
560 l/h / 148 US gph
0,8 MPa / 8 bar / 116 psi
480 l/h / 127 US gph
15 MPa / 150 bar / 2175 psi
78,5 dB (A) - ± 3
2,03 m/s² - k 0,1
310 x 308 x 820 mm / 12 x 12 x 32 in
0,35 l / 0,09 US gal
10 Lifting handle
11 Nozzle support head
12 Water inlet quick-fit connector
13 Housing for electric power cord
14 Water gun
15 Lance hose
16 Rotating lance
17 Nozzle cleaning pin
18 Rotojet rotating nozzle head
19 Foaming lance
20 Detergent intake adjuster
KL 1680
2,3 kW
16 A
5 °C / 41 °F
0 m / 0 ft
23 N
14 kg / 31 lb
(continues on the next page)