Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
WARNING
These high pressure jet cleaners consist of: a supporting steel tubular frame fitted on two wheels, a
polyethylene tank, a high pressure hose reel, a high pressure lance and a motor-pump complete with
combustion motor and high pressure pump.
They can be used wherever a power socket and water supply point are not available.
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20%
lower than the machine's maximum performance.
• The engine's maximum power diminishes as the altitude and ambient temperature at which it is
working increases (there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every
5.6°C/42°F above 16°C/61°F). If the high pressure water cleaner is used at a high altitude or with high
ambient temperature please refer to the engine's operating and maintenance manual to see if any
precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient
temperature of 16°C/61°F.
• The specifications and technical data are approximate. The manufacturer reserves the right to make
all changes to the machine it deems appropriate.
MOTORISATION
Fuel
Power
Nominal rotation speed - maximum
HYDRAULIC CIRCUIT
Maximum supply water temperature
Minimum supply water temperature
Minimum supply water flow rate
Maximum supply water pressure
Maximum priming depth
PERFORMANCE
Maximum flow rate
Nominal flow rate
Maximum pressure
Nominal pressure
Maximum reaction force on the spray gun
Sound pressure level - Uncertainty
Sound power level
Operator hand-arm vibration - Uncertainty
PUMP OIL
TANK CAPACITY
WEIGHT AND DIMENSIONS
Length x width x height (mm - in)
Weight
(1)
Measurements in agreement with EN 60335-2-79.
16
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
SPECIFICATIONS AND TECHNICAL DATA
(kW - HP)
(RPM)
(°C - °F)
(°C - °F)
(l/min - USgpm)
(bar - psi)
(m - ft)
(l/min - USgpm)
(l/min - USgpm)
(bar - psi)
(bar - psi)
(dB(A))
(dB(A))
(m/s
(mm - in)
(kg - lb)
8/160 LWD-K
3,6 - 4,8
21 - 5,5
(N)
2
)
AGIP ROTRA MULTI THT
1200x800x1100 - 47,2x31,5x43,3
(2)
Also see the corresponding oils table.
FDX WB
8/160 BWD-K
Petrol
4,1 - 5,5
3400 - 3600
60 - 140
5 - 41
55 - 14,5
8 - 116
0,5 - 1,7
8 - 2,1
7,5 - 2,0
160 - 2320
150 - 2175
20
(1)
92,8 - 0,7
(1)
106,8
(1)
1,1 - 0,24
(2)
120 - 31,7
70 - 154,3
Werbung
Inhaltsverzeichnis
