Blade Replacement (By An Approved Agent); Consumables; List Of Consumables - JAC Varia Pro VMP 800 Übersetzung Der Originalanleitung

Be sure to check that your approved agent has recorded his work in your service booklet in order to
maintain your 5-year warranty cover.
8.3

Blade replacement (by an approved agent)

(fig.7)
Be sure to wear cut-resistant gloves (Standard EN 388: 2003 factor B= 5) and safety footwear always
when replacing a blade or when working in the vicinity of the blades.
Having ensured that the plug on the machine (fig.2, n°12) has actually been disconnected from the mains:
Open the door (fig.1, n°10) using the lock (fig.1, n°9).
Remove the crumb tray (fig.1, n°8).
Replace the blade:
A. Unscrew the two spanners located on the left-hand side of the machine (fig.7, n°23).
B. Remove the blade guard (fig.1, n°6) by means of the Allen screws.
C. Unscrew the nut that secures the blade (fig.7, n°24) using the two spanners supplied (fig.7,
n°23).
D. Remove the spacer and replace the blade, taking care to position it correctly on the locator
pins. Replace the spacer.
E. Fit and tighten the new nut supplied with the new blade to lock the blade, using the spanners
supplied. It is important that the new nut be fitted in order to ensure optimum tightening.
Refit the crumb tray and close the door.
Connect the machine to the mains supply, it is now ready.
Be sure to check that your approved agent has recorded his work in your service booklet in order to
maintain your 5-year warranty cover.
Please note that your blade is recyclable subject to an assessment by JAC; contact your approved
agent for further information.
9

CONSUMABLES

When ordering spare parts, check with your approved agent which part is required based on the spare
parts catalogue issued by the manufacturer.
Always specify the machine serial number as shown on the nameplate.
Your agent will place the orders with JAC.
9.1

List of CONSUMABLES

ITEM CODE
5740214
BVMPT012
6110029
7240043-V800
7240043-V1000
MP00304
BVMPA005
BVMPT005
?
BVMPT003
DESCRIPTION
PLASTIC CASTOR 18DIA.X7
SLIDE PAD
CIRCULAR BLADE, 420DIA. 3MM THICK
LINEAR GUIDE BELT T5
LINEAR GUIDE BELT T5
FOAM STRIP 10x2
SPRING STRIP
ROLLER POM
FOAM, SLICE HOLDING ARM
CLAW GUIDE 800
15
MODEL
ALL
ALL
ALL
800
1000
ALL
ALL
ALL
ALL
800
English