g) Capacity Measuring
Make sure that all the circuit parts, switches and components and other objects of
measurement are disconnected from the voltage and discharged.
- Turn the DMM on and select measuring function "CAP".
- Plug the red measuring lead into the V measuring socket
(9) and the black measuring lead into the COM measuring
socket (8).
- Connect the measuring prods to the component.
- If "OL" (overload) appears on the display, you have excee-
ded the measuring range or the measuring circuit has
been broken.
- After measuring, remove the measuring leads from the
measuredobject and turn the DMM off.
Always observe correct polarity for electro-
lyte capacitators.
Make sure to use measuring leads that are as
short as possible. Long measuring leads may
cause measuring deviations.
48