Capacity Measuring - VOLTCRAFT Multi-DMM MT-52 Bedienungsanleitung

g) Capacity Measuring
Make sure that all the circuit parts, switches and components and other objects of
measurement are disconnected from the voltage and discharged.
• Turn the DMM on and select measuring function
"CAP".
• Plug the red measuring lead into the V measuring
socket (9) and the black measuring lead into the
COM measuring socket (8).
• Connect the measuring prods to the component.
• If "OL" (overload) appears on the display, you
have exceeded the measuring range or the
measuring circuit has been broken.
• After measuring, remove the measuring leads
from the measured object and turn the DMM off.
Always observe correct polarity for elect-
rolyte capacitators.
Make sure to use measuring leads that
are as short as possible. Long measuring
leads may cause measuring deviations.
64