sk tecnica mimì-norma multilingue2.qxp
Mimic panel
press for 2 seconds to turn on and off, exits from the menu
to access the menu
to increase the various settings
to decrease the various settings
(pellet loading/reserve button)
press once to 'inform' the thermal stove memory that a 15 kg sack of pellets has been loaded, thereby allo-
wing it to keep track of the reserve.
(boiler setting button)
this button together with the +/- keys controls a secondary circuit, e.g. that of a boiler.
The right side of the display shows the temperature of any external storage tank/boiler (if the boiler sensor is
connected). Press the 'boiler' button to see the set value and rotate the right knob to modify the setting.
If the boiler sensor is not connected, dashes will appear instead of the temperature (--- °C).
Right knob: sets the temperature for the secondary circuit, e.g. for the boiler.
Left knob: sets the temperature that the stove is to emit.
Left knob
30/11/2009
12.03
OPERATION
Pellet load/reserve
Left display
Remote receiver
Pagina 32
Boiler
Right display
31
Right knob