Technical Data; Unpacking; Assembly / Before Commissioning - Scheppach Mix65 Original Bedienungsanleitung

• Risk of injury from rotating parts
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, re-
lease the start button and pull out the power plug.
• Further, indeterminate residual risks may remain
even after taking all relevant preventive measures.
• Residual risks can be minimised if the safety instruc-
tions and conditions for proper use, as well as the
operating instructions, are observed
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this manual. In doing so, your concrete mixer pro-
vides optimal performance.
• Keep your hands away from the work area, when the
machine is in operation.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the electric tool.

6. Technical data

Motor
Engine output
Max. speed
Max. speed, drum
Capacity
Protection category
Operating mode*
Protection class
Dimension
Weight
Technical changes reserved!
*S6 30 %: Continuous duty with intermittent loading
(operating time 10 min.)
To avoid impermissible overheating of the motor, the motor
should be driven for only 30% of the operating time with the
stipulated nominal power and must then continue to run
with no load for the remaining 70% of the operating time.
22 | GB
230 V / 50Hz
0,22 kW
2850 min
-1
27,5 min
-1
63 l
IP44
S6 30%
II
1161 x 550 x 935 mm
25 kg
www.scheppach.com
Noise & vibration
m Warnung: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
7.

Unpacking

Open the packaging and carefully remove the device.
Remove the packaging material, packaging and trans-
port safety devices (if applicable). Check that the deliv-
ery is complete. Check the device and accessory parts
for transport damage. In the event of complaints the
carrier must be informed immediately. Later claims will
not be recognised.
If possible, keep the packaging until the end of the war-
ranty period.
Familiarise yourself with the product by means of the
operating instructions before using for the first time.
With accessories as well as wearing parts and replace-
ment parts use only original parts. Replacement parts
can be obtained from your dealer.
When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m ATTENTION!
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!

8. Assembly / Before commissioning

m ATTENTION!
Always make sure the device is fully assembled
before commissioning!
Fitting foot to frame (enclosed accessories bag A)
(fig. 4)
Mount foot (i) with 2 screws, 2 washers and 2 nuts to
the frame (j) and tighten securely.
82,12 dB
61,33 dB
2,54 dB