eder Titan 80 Pro Bedienungsanleitung Seite 43

Fracture bar
PPressing the wedge out of the felling cut
T The felling cut must be cleanly formed and there must be no
43 Titan 80 Pro, Funk Titan 80, Titan 50
cutting steps against which the feed wedge can run. It must also
be ensured that the feed wedge cannot collide with the breaking
strip.
Ensure that the felling cut is smooth.
>
Ensure that there is sufficient distance for the feed
>
wedge.
Risk of injury from falling tree!
Observe the correct dimensions of the breaking strip and
>
the support strap.
Supporting ligament
WARNING
WARNING
EN
309001_00 | 03.2023