Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - Ferm TCM1003 Gebrauchsanweisung

Radial-fliesenschneider
Inhaltsverzeichnis

Werbung

MAINTENANCE

During maintenance and cleaning always remove
the mains plug from the socket. Never use liquids
when cleaning electrical parts of the tile cutter.
The Ferm machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local Ferm dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Ferm-
dealer. Here they will be disposed of in an
environmentally safe way.
6
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
ı
( UK )
CE
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN61029-1
EN55014-1, EN-55014-2,
EN61000-3-2, EN61000-3-3
in accordance with the regulations:
98/37EEC
73/23EEC
89/336EEC
from 11-01-2003
GENEMUIDEN NL
W. Kamphof
Quality department
,
,
:
.
,
,
.
,
.
Ferm
.
.
.
.
,
.
.
.
,
,
.
.
Ferm.
,
Ferm
Ferm
. 9 (
. 4)
.
,
(
. 8).
ı
CE
.
EN55014-1, EN-55014-2,
EN61000-3-2, EN61000-3-3
.
11-01-2003
.
GENEMUIDEN NL
W. Kamphof
Quality department
,
.
,
,
.
. .
Ferm.
.
,
.
.
.
( GR )
:
EN61029-1
:
98/37/EEC
73/23/EEC
89/336/EEC
75

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Frtc-550

Inhaltsverzeichnis