Installation - Quick MILL Luna Handbuch Für Fortgeschrittene

5. INSTALLATION

The machine is delivered ready for installation according to the plate data.
The machine is provided to function with a container
Make sure that the power line has the same characteristics as the machine.
The electric power supply system is to be fitted with a circuit breaker or an
automatic main switch with an efficient ground socket. If there is no electrical
protection, have a differential magnetothermal bipolar switch installed by a
qualified electrician, as required by the safety standards in force.
The appliance connection to ground is obligatory. The
manufacturer shall not be held in any way liable if this
accident-prevention regulation is not observed.
Take care not to damage the power supply cable by bending, crushing or strain.
To avoid possible damage, disconnect the appliance pulling the plug and not the
cable, never touch the plug with wet hands.
It is advised to avoid machine connection in niches or similar to avoid difficulty
when operating, refilling or carrying out maintenance. Position the machine at a
minimum distance of 15 cm from the walls and insert the plug in the current
socket.
The surface where the machine is installed is to be level, dry, robust, stable and
at a height of 80 cm. from the floor.
After positioning the machine, insert the plug in the current socket.
104