Installation; Dispensing Traditional Coffee; Dispensing Hot Water - Quick MILL 0835 Bedienungsanleitung

5. INSTALLATION

5.1 PACKAGING
It is a good idea to keep the original packaging after removing it in case
the coffee maker needs to be shipped or moved. The original packaging
is used only to protect the machine during shipping.
5.2 CONNECTION TO THE MAINS
Before connecting the power cord to a socket make sure the main switch
is 2 on "0".
For your safety and the safety of others
closely follow the instructions in chapter 3.
5.3 FILLING THE WATER TANK
Extract the water tank 7 and clean it carefully, fill it with fresh water to
two centimetres from the top, put it in its seat so that the suction pipe and
9 back flow pipe 8 are inside the tank.
Use drinking water which is not sparkling, other liquids may
damage the tank. Do not start the machine without first filling
the water tank.
5.4 STARTING THE MACHINE
Before starting the machine for the first time or after it has not been used
for a long time follow the instructions below:
• Press the start key 2 with warning light
• The warning light 3 indicates that the machine is heating,
wait for the light to go out.
• Press the coffee switch 4 let the water run for around a minute and
turn off the switch.
• Extract the wand 10, put a container under the wand, turn on the
coffee switch 4 in order to carry out a complete cleaning.
22
QUICK MILL
MOD. 0835 - 02835 - 03035
6.1 COFFEE GRINDING
Pour the coffee beans into the hopper 22 and close the lid 21. Turn on
the luminous switch 2 with consequent illumination of the indicator light
3. Choose the quantity of coffee to be ground by means of the timod
coffee doser 27. The quantity of coffee is increased when turning the
selector in a clockwise direction and decreased when turning in
anticlockwise direction. The grade of grinding (from fine to coarse) is
selected by means of the lever 24/25. Choose the one or two-cup filter,
insert in the filter holder 15 and place it under the ground coffee exit.
Press the coffee grinder starter button 6 one time for one cup, twice for
two cups. The grinder will automatically stop when the pre-set amount of
coffee has been ground.
6. DISPENSING TRADITIONAL
COFFEE AND WITH PODS
Do not remove the filter holder 15 while dispensing coffee.
Danger of getting burned!
1. Insert in the filter holder 15 the filter for one cup 16 or two cups 17
(fig. I).
2. Place the filter holder under the ground coffee exit and carry out the
operations described in the grinding chapter.
3. Press the coffee down with the presser.
4. Insert the filter holder in the dispensing unit 14 and turn anti-
clockwise.
5. Make sure the wand 10 is inserted in the machine otherwise it will
not dispense coffee.
6. Put one or two cups under the filter holder based on the filter used.
7. Press the coffee switch 4 when the desired amount of coffee has been
dispensed turn off the switch.

7. DISPENSING HOT WATER

When you start dispensing, the hot water may spray.