Software Settings - struers AbraPlan-10 Gebrauchsanweisung

AbraPlan-10
Instruction Manual
Switch on the power at the main switch located at the right hand
side of the machine. The following display will appear briefly:
The display will then change to the last screen shown before

Software Settings

AbraPlan-10 was switched off. When switching on AbraPlan-10
for the first time, the MAIN MENU display will appear. If the
heading in the display is different, press Esc, until the MAIN
MENU appears.
The MAIN MENU is the highest level in the menu structure.
From this menu, you can enter the configuration menu and
grinding process menu.
11