Cutting Process; Maintenance And Cleaning; Disposal - Parkside PRSA 20-Li A1 Originalbetriebsanleitung

Cutting process

Set the desired cutting depth as described above.
♦ Switch on the appliance and wait until it has
reached full speed.
♦ Hold the appliance firmly.
♦ Guide the appliance carefully along the work-
piece.
♦ Complete the operation at a uniform speed and
contact pressure.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch off the appliance and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a dry cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
■ The carbon brushes should only be replaced by
the service centre or an authorised specialist
workshop.
NOTE
► Replacement parts not listed (such as switches)
can be ordered via our Service Hotline.
WARNING!
■ Have your appliances repaired by the
Service Centre or a trained electrician,
and use only original spare parts. This will
ensure that the safety of the appliance is
maintained.
PRSA 20-Li A1
WARNING!
■ If the mains cable requires replacement,
this should be carried out by the manufac-
turer or an approved representative to
avoid safety hazards.

Disposal

Applies only to France
The product, its packaging and the operating
instructions are recyclable. They are subject to an
extended manufacturer responsibility and will be
collected separately.
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
GB │ IE │ 9 ■