Motorola CLP-Serie Bedienungsanleitung Seite 7

4. Press the "Menu" button on the source radio to start the cloning process. The source radio
generates the start clone tone.
5. Once the cloning is completed, turn the target radio OFF and back ON again in order to
activate the radio.
6. To clone another radio, repeat steps 3, 4 and 5.
7. To exit clone mode on the source radio, turn the radio OFF.
Charging Status LEDs
On the MUC, the radio charging pocket has an LED indicator. The LED indicators are grouped into
pairs to show which charging pockets are paired. The LED is red when the battery is charging, then
it turns to green once the battery is fully charged.
ESTIMATED CHARGING TIME
Charger Standard
Type Li-Ion
Multi Unit
2.5 Hours
Charger
High Capacity
Li-Ion
4 Hours
5
English