Turning The Lighting On/Off; Tyres (Correct Pressure And Required Pump) - dutch id FLOW Bedienungsanleitung

CAUTION
6
Do not use sharp or pointed objects to press the on/off button.
The e-bike is now turned on.
Press the on/off switch again to turn the e-bike off again.
The e-bike will automatically turn off to save energy after 10 minutes of inactivity.
4
5.6. Turning the lighting on/off
Figure 21 - Keep the '+' button depressed to switch the bicycle lighting on or off.
Keep the ' ' button depressed to switch the bicycle lighting on or off.
Once you have turned on the lighting, this will be indicated in the status bar at the bottom of
4
the display of the on-board computer.
The rear light i is fitted with a brake indicator that allows the rear light to burn more brightly
4
when you brake hard.
5.7. Tyres (correct pressure and required pump)
CAUTION
6
Regularly check that the tyres of the e-bike are at the correct pressure. Insufficient tyre pressures
lead to more rapid tyre wear, reduced grip and higher energy consumption of the e-bike system.
The ideal tyre pressure for the e-bike is 4 Bar.
You can also read the ideal tyre pressure on the side of the tyre.
4
The tyres have Dutch valves. You can pump them up using a standard bicycle pump.
EN
79