Before First Use; Placing The E-Bike On The Stand/Removing It From The Stand; Checking The Battery; Installing The Battery - dutch id FLOW Bedienungsanleitung

4. Before first use
4.1. Placing the e-bike on the stand/removing it from the
stand
Place the e-bike on the stand if you wish to park or adjust the bike.
CAUTION
6
Never park the e-bike on a slope with the front facing downhill. The e-bike may fall over, as the
stand cannot hold the weight of the e-bike.
4.2. Checking the battery
Check the battery j before charging it or using your e-bike for the first time.
1. Activate the battery level LEDs v by pressing the activation button z.
Ҍ If one or more battery level LEDs v illuminate, the battery j works and can be used.
Ҍ If none of the battery level LEDs light v, the battery j may be damaged. In this case,
contact your local dealer or Dutch ID.
WARNING
6
Do not charge or use a damaged battery.
4.3. Installing the battery
Follow the steps below to install the battery in the battery holder.
1. Open the battery cover t.
Figure 6 - Open the battery cover.
EN
67