Configuring The On-Board Computer; General Operation; Preparation; Getting Used To Using Your E-Bike - dutch id FLOW Bedienungsanleitung

Figure 19 - Correct lighting angle.
4.8. Configuring the on-board computer
WARNING
6
Ҍ Only configure the on-board computer when you are stationary in a safe place. Keep your
eyes on the road and surroundings at all times while cycling.
4.8.1. General operation
Ҍ Adjust the pedal-assist level with
Ҍ Switch between distance cycled TRIP, total distance TOTAL and remaining range RANGE by
keeping pressed down briefly.
Ҍ On the screen, switch between kilometres and miles by keeping pressed down and briefly
pressing the on/off switch on the on-board computer b.
Ҍ Reset the distance cycled TRIP to 0 by keeping and pressed simultaneously.
Read more about the on-board computer in the Bosch manual at www.dutch-id.nl
4

5. Preparation

5.1. Getting used to using your e-bike
We recommend first trying out the e-bike in a place where there is little or no traffic. This
allows you to become familiar with cycling with pedal assist and the various assist levels in an
environment free of distractions.
76
and .