EKOM DK50 2V/50/M Benutzerhandbuch Seite 45

INSTALLATION
Fig. 20: Positioning the compressor for electrical connections
 Electrically connect the compressor per Chapter 13.
 Insert the compressor with dryer into the cabinet so that the dryer fan fits into the cooling tunnel
opening in the cabinet.
 Connect the cabinet pressure gauge to the compressor per Chapter 12.2.
Do not push the compressor all the way to the back of the cabinet as it may
permanently damage the dryer.
Front panel of the cabinet installation
 Attach the front panel to the cabinet, connect the display connector (Fig. 17), and secure the
cord to the display in the clamp (1) in the front door (Fig. 21).
05/2022 45 NP-DK50 2V 50, 2x2V 110-AD-2_05-2022