EKOM DK50 2V/50/M Benutzerhandbuch Seite 43

INSTALLATION
Fig. 17: Connecting the display connector
Fig. 18: DK50 2V/50S/M cabinet clamps
14.2. DK50 2x2V/110S/M (Fig. 4-B)
Opening the upper cover
 Lift the upper cabinet cover grabbing it by its handle (26) so that the gas springs keep the cover
open.
Be careful not to pinch your fingers when closing the cover on the cabinet.
Removal of the front panel on the cabinet
 Remove the front panel held by 4 screws and disconnect the display connector and the
earthing lead.
05/2022 43 NP-DK50 2V 50, 2x2V 110-AD-2_05-2022