INSTALLATION
Fig. 14: Positioning of the compressor for connections
Make the pneumatic connections per Chapter 12.1.
Connect the condensate collection tank per Chapter 12.3.
Route the pressure hose, the condensate drain hose, and the power cord through the opening
in the rear wall of the cabinet.
Position the compressor at such a distance from the cabinet so the WINSTA connector can
make the electrical connection between the compressor and the cabinet (Fig. 13, Fig. 15).
Fig. 15: Positioning the compressor for electrical connections
05/2022
41
NP-DK50 2V 50, 2x2V 110-AD-2_05-2022