Meaning Of The Marking; Eu Declaration Of Conformity - Parkside PSHL 2 D1 Originalbetriebsanleitung

z Meaning of the marking
Safety viewing pane tested in accordance with DIN EN 166
(C6316CMC, C6317CMC, C6318CMC):
• Viewing pane: CMC F CE
CMC = Manufacturer code / F = mechanical resistance (low-velocity impact at 45 m/s) / CE = CE mark
• Rear lens: CMC 1 F CE
CMC = Manufacturer code / 1 = Optical class / F = mechanical resistance (low-velocity impact at 45
m/s) / CE = CE mark
ADF tested in accordance with DIN EN 379: 4/5-9/9-13 CMC
1/1/1/2/379 CE (C6606CMC) Explanation:
4 = light condition
5-9/9-13 = dark conditions
CMC = Manufacturer code
Digit 1 = Optical class
Digit 2 = Scattered light class
Welding helmet shell: CMC EN 175 F CE (C6314CMC, C6315CMC)
Identification of the manufacturer: CMC
Number of this standard: EN 175
Application area(s) (if required): S, F, B
Mass in grams (if required)
Protection class for the welding helmets
item no.: 2272/2273
CE= CE mark
Symbol
S
F
B Medium-velocity impact
If the symbols F, B and S are not present for either the viewing pane or the frame, then the
complete eye protection equipment is to be rated at the lower level.
Certification body:
DIN CERTCO Gesellschaft für Konformitätsbewertung mbH
Alboinstrasse 56, 12103 Berlin, Notified body number 0196
z EU Declaration of Conformity
1. PSA (product, type, batch or serial number):
Protection type
Increased resistance
Low-velocity impact
Digit 3 = Homogeneity class
Digit 4 = Angle-dependence class
379 = Test standard
CE = CE mark
Description of the application area
Mechanical resistance
Mechanical resistance
Mechanical resistance
31
GB