Cleaning And Maintenance; Storage; Information About Recycling And Disposal; Meaning Of The Marking - Parkside PSHL 2 D1 Originalbetriebsanleitung

Cleaning and maintenance / Storage / Information about ... / Meaning of ...
z Cleaning and maintenance
Do not use any abrasive detergents to
„
clean the helmet casing
Never allow the UV filter
„
contact with water.
Clean the product with a soft and dry or
„
moistened cloth or clean it with a cloth
moistened with disinfectant.
z Storage
Keep the device in a dry location and
„
out of the reach of children.
During storage, make sure the LED light
„
switch is switched off (left position
14
"OFF").
z Information about recycling
and disposal
Don't throw away – recycle!
Please return this device, accessories
and packaging to your local recycling
depot.
Do not dispose of the automatic welding
helmet in household waste, in fire or in
water. Devices that are no longer functional
should be recycled wherever possible.
Ask your local stockist for advice.
As the consumer you are legally
obliged (by the German Battery
Ordinance) to return any and all
used batteries. Batteries containing harmful
substances are labelled with the adjacent
symbol, which indicates the prohibition on
disposal in household waste. The abbrevia-
tions for the relevant heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead.
Take used batteries to a waste management
company in your city or community or return
them to your dealer. This satisfies your legal
obligations while also making an important
contribution to protecting the environment.
.
2
z Meaning of the marking
to come into
8
Safety viewing pane tested in
accordance with DIN EN 166
(C6316CMC, C6317CMC,
C6318CMC):
• Viewing pane: CMC F CE
• Rear lens: CMC 1 F CE
ADF tested in accordance with
DIN EN 379: 4/5-9/9-13 CMC
1/1/1/2/379 CE (C6313CMC)
Explanation:
4 = light condition
5-9/9-13 = dark conditions
CMC = Manufacturer code
Digit 1 = Optical class
Digit 2 = Scattered light class
Digit 3 = Homogeneity class
Digit 4 = Angle-dependence class
379 = Test standard
CE = CE mark
Welding helmet shell: CMC EN 175 F
CE (C6314CMC, C6315CMC)
Identification of the manufacturer: CMC
Number of this standard: EN 175
CMC = Manufacturer code
F = mechanical resistance
(low-velocity impact at 45 m/s)
CE = CE mark
CMC = Manufacturer code
1 = Optical class
F = mechanical resistance
(low-velocity impact at 45 m/s)
CE = CE mark
GB 15