List Of Pictograms Used Introduction; Intended Use; Parts Description - Parkside PSHL 2 A1 Montage-, Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

List of pictograms used / Introduction
List of pictograms used
Caution!
Read instructions for use!
Do not dispose of electrical
equipment in household waste!
Attention: The welding helmet does
not provide any eye, ear or face
protection!
Auto-Darkening Welding
Helmet PSHL 2 A1
z Introduction
Congratulations! You have chosen a
high-quality product from our
company. Familiarise yourself with the product
before using it for the first time. In addition, please
carefully refer to the instructions for use and the
safety instructions below.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

z z
This welding helmet protects the eyes and face from
sparks, splashes and UV rays while welding and
automatically adapts to the lighting conditions. It
ensures an immediate, sensor-controlled darkening
upon arc ignition as well as automatic illumination
at the end of the welding procedure (including
a short delay to protect against afterglow). This
welding helmet provides a freely adjustable DIN
protection level with a lateral adjustment wheel and
is also adjustable for flying sparks during grinding
work. Only use the product as described and
for its indicated purpose. Keep these instructions
in a safe place. When passing this product on
to others, please also include all the documents.
Any use other than the intended is prohibited and
46 GB/IE/NI
Attention, potential dangers!
Important notice!
Warning: arc rays can injure the
eye's retinas!
potentially dangerous. Damages resulting from
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer's
liability. This device has been designed for house-
hold use and may not be used for commercial or
industrial purposes.

Parts Description

z z
1
Viewing pane
2
Helmet casing
3
Solar cell
4
Rear pane
5
Headband
6
Adjustable headband button
7
Adjustable headband buttons
8
UV filter
9
Darkening regulator
10
Test button
11
Delay setting
12
Sensitivity setting
13
Low battery display
14
LED Lighting switch
15
Battery compartment
16
Bracket