Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Storage; Symbols And Definitions - Braun Pulse Oximeter 1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
Storage Temperature:
Operating Humidity:
Storage Humidity:
Atmospheric pressure :

Maintenance and storage

1. Replace the batteries when low voltage symbol is lit.
2. Clean the surface of the oximeter before it is used to take a
measurement.
3. Remove the batteries if you will not use the oximeter for an
extended amount of time.
4. For product preservation store the device in -10~40 ºC (14-104 ºF)
and 10%-95% humidity.
5. It is recommended that the product should be kept dry at all
times. Excessive humidity might affect its lifetime and even
damage the product.
6. This device is factory calibrated and no further calibration is
required by the user.
To protect the environment, dispose of empty batteries at
appropriate collection sites according to national or local
regulations.
Please do not dispose of the product in the household waste
at the end of its useful life. Disposal can take place at your
local retailer or at appropriate collection points provided in
your country
Inquiry
In Europe, any serious incident (e.g., death, life-threatening injury,
surgical intervention, etc.) that has occurred in relation to this
product should be reported to the manufacturer and/or authorised
representative in the European Community and to the competent
authority of your member state.
The first 3 numeric digits in the LOT number represent the day of the
year of manufacture. The next 2 numeric digits represent the last
two numbers of the calendar year of manufacture and the letter(s)
at the end designate the manufacturer of the product. (e.g.: LOT No.:
07322YNG this product was made on the day 73, year 2022 at the
manufacturer code YNG.)
Box content
One Braun Pulse oximeter
One lanyard
One user manual
2 AAA 1.5V alkaline batteries
10
-10 ºC~40 ºC (14 ºF ~ 104 ºF)
15%~80% RH, Non condensing
10%~95% RH, Non condensing
70kPa~106kPa

Symbols and definitions

Refer to instruction
Type BF Applied Part
manual/booklet
40
C
40
C
5
C
-10
C
Operating Temperature
Storage Temperature
Importer
Distributor
Batch Code
Serial Number
UDI
Authorized representative in
Unique Device Identifier
the European Community
English
Manufacturer
Voltage – direct current
80%
95%
15%
10%
Operating Humidity
Storage Humidity
IP22: Protected against solid foreign objects greater than
12.5 mm in diameter and dripping water when tilted up to 15º
Medical Device
Catalogue Number
106 kPa
70 kPa
Symbol for compliance with
Atmospheric Pressure
MDD 93/42/EEC requirements
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Yk-81ceu

Inhaltsverzeichnis