Connection Of The Encoder; Encoder Cable; Encoder Line Length - KEB COMBIVERT f5 Betriebsanleitung

Encoder Interface Resolver / HTL Input
3.2.3

Connection of the encoder

• Encoder cable double-shielded and twisted in pairs
• Apply external shielding on both sides at the connector housing
• Connect interior shieldings at one side at the interface to GND
• Do not connect exterior and interior shielding
Figure 3.2.3 Connection of the encoder
Motor encoder plug
�
�
��
�
PIN
10
11
Housing
3.2.4

Encoder cable

KEB encoder cables are corresponding to the following specification:
3.2.5

Encoder line length

The maximum line length of the encoder cable is 50 m. Please contact KEB if longer enco-
der cables are required.
�
�
�
��
�
��
�
�
1
5
7
2
–
Temperature range
Signal lines
Supply lines
Particularities
Color
Socket X3A
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
PIN Name Core color
3 SIN_LO red
8 SIN_HI blue
5 REF_LO yellow
10 REF_HI green
4 COS_LO pink
9 COS_HI gray
14 GND interior shieldings
– Housing total shielding
3 x (2 x 0,14 mm²)
trailing capable, oil resistant
constant up to 80 °C
2 x 0,5 mm²
green RAL 6018
GB-9