Indication Of Residual Heat; Power Function And Super Power Function; Timer Function - Novy 1821 Panorama Bedienungsanleitung

The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
no longer be active.

4.3.3 Indication of residual heat

After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
symbol disappears when the cooking zone glass can be
H
handled without danger.

WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.

4.3.4 Power function and Super Power function

The Power function P and Super Power
power rating of the selected cooking zone. If this function is
activated, these cooking zones will be subjected to considerably
higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch off Power
Glide your finger over the slider
Switching Super Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch on Super Power
Press the end of the slider again
Switch off Super Power
Glide your finger over the slider
Switch off Power
Glide your finger over the slider
Management of maximum power:
The hob is divided into 2 separate heating groups.
symbol will flash
will
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
. The
H
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2.
Cooking zone Ø in cm
A1
A2
B1
increases the
B2
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
In order to be able to make use of the maximum possible power
Display
for 2 zones at the same time, use a combination of zone A1 or
P
A2 and B1 or B2.

4.3.5 Timer function

9‐0
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Display
P
Setting or changing the cooking time
Select the power by gliding your finger over the
slider
+ P
Select the timer
P‐0
Press
and if necessary press simultaneously again
until the hourglass of the relevant zone is
9‐0
highlighted
– 62 –
B2 B1 A2 A1
8 8
B2 B1
19 x 22
19 x 22
19 x 22
19 x 22
Timer function
‐ +
and on the timer at the same time
8 8 8
8 8
min
A2 A1
Power (W)
Normal: 2100
Power: 3000
Super Power: 3700
Display
P
8
Display
1‐P