Pan Detection; Residual Heat Indication; Power And Super Power Function - Novy 3762 Montageanleitung Und Bedienungsanleitung

Pan detection

This cooktop is fitted with an interactive control system that makes it very easy and comfortable to
use. After switching on the cooktop, when you put a cookware on the glass, the control system
automatically detects it. This system also automatically indicates you which slider control to use by
displaying a [ 0 ] over it. You then just have to set the expected cooking level.
Pan detection ensures a perfect safety. Induction does not work:
 If there is no pan on the heating zone, or if this pan is not adapted to induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears
when an induction pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display shows
U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, switch the heat element off: do not let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and the symbol [ H ] indicates this on the display.
The symbol [ H ] disappears when the heating zones can be touched without danger.
Do not touch the heating zones and do not put any heat sensitive objects on them, as long as the
residual heat indicators are switched on. There are risks of burns and fire.

Power and Super Power function

Power [ P ] and Super Power[
When this function is activated, the heating zones work during 10 minutes at an ultra- high speed.
This is meant to be used for heating up big quantities of water very quickly (for e.g. pasta).

Start up / Stop the Power:
Action
Start up the Power
Stop the Power

Start up / Stop Super Power:
Action
Start up Power
Start up Super Power
Stop Super Power
Stop Power

Power management:
The whole cooking hob is equipped with a maximum potential. When the Power function is
activated, the electronic system automatically orders to reduce the power level of another heating
zone, in order to avoid exceeding the maximum potential. The display blinks [ 9 ] during a few
seconds, then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed
] grant a boost to the selected heating zone.
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Slide on the "SLIDER"
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Re-press key [ + ]
Slide on the "SLIDER"
Slide on the "SLIDER"
Other heating zone: (example: Booster level 9)
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
54
Display
[ P ]
[ 9 ] to [ 0 ]
Display
[ P ]
[ and P ]
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
[