4 INDUCTION HOB
4.1 Controlling the induction hob
Hob control
Indication of the timer time
Switch hob on/off
Stop & Go control key
Zone selection key
Bridge function lamp
Power level indication Timer indication
Keep warm function key
Chef function
Grill function
Slider control indication
4.2 Control keys and slide operation
The device is equipped with touch control keys with which you
can set the various functions. Touching the control key operates
the function. Activating a function will cause a light, reading
and/or sound signal to be displayed.
WARNING: Do not push multiple control keys
simultaneously during normal use.
In order to select power, simply glide your finger over the slider,
on the LED indication.
You can also access a certain level directly by using your finger
to select the desired level.
8
Zone for slider control
– 48 –
4.3 Controlling the hob
4.3.1 Switch on and off
Switching the hob on and off:
Switch on
Press
and continue to hold for 2 sec
The display will light up
Switch off
Press
Display goes out
Switching a cooking zone on and off:
Set up
Slide from left to right on the slider
(slider operation for power)
Switch off
Slide from right to left on the SLIDER until the
display shows
or
= "Hot".
0
H
If there is no control input within 20 seconds, the electronics will
return to the wait position.
4.3.2 Pan detection
This hob is equipped with an interactive control system that
makes use of the hob even easier.
When you place a pan on the hob, it is automatically detected.
You will also see a
0
to show you which slider to use for the
zone in question. The pan detection ensures optimum safety.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the
symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The
symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
no longer be active.
4.3.3 Indication of residual heat
After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H
symbol disappears when the cooking zone glass can be
handled without danger.
WARNING: As long as the residual heat
indication remains active, the cooking zone(s)
must not be touched and no heat-sensitive items
should be placed on the cooking zone. Risk of
fire and burns.
Display
0‐9
0
H
symbol will flash
will
H
. The