Pan Detection; Residual Heat Indication; Power Function; Super Power Function - Novy Flex Zone Montage- Und Bedienungsanleitung

 Start-up/ switch off a heating zone
Action
Increase power
Decrease power
Stop

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work :
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disapears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put
any heat sensitive object on them . There are risks of burn and fire.

Power function

The Power function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 10 minutes with an ultra high
power.
The Power function is foreseen for example to heat up rapidly big quantities of water, like
nuddels cooking.
 Start up / Stop the Power function
Action
Start up Power
Zone selection
Stop Power

Super Power function

The Super Power function grants a boost of power.
The Super Power function has 2 power levels:
 1
st
level Power displayed by [ P ]
 2
nd
level Super Powerr alternately displayed by 2 and 4 vertical segments [
P ].
If this function is activated the heating zone works during 10 minutes with an ultra high power.
Control panel
Touch key [ + ]
Touch key [ - ]
Touch simultaneous [ + ] and [ - ]
Control panel
Press [ P ] key
Press key [ + ] or [ - ]
from the desired
heating zone
Press key [ - ]
from the boosted
heating zone
48
Display
[ 4 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
control light is blinking
[ P ]
[ 9 ]
] and [