Pan Detection; Indication Of Residual Heat; Power Function; Timer Function - Novy 40 00x Up Bedienungsanleitung

4.1.3 Pan detection

The cooking zone that has been switched on is only active
when a cooking pan is detected by the pan detection system.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use.

4.1.4 Indication of residual heat

After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
symbol disappears when the cooking zone glass can be
H
handled without danger.

WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.

4.1.5 Power function

Power function boosts the power to the back cooking zone.
P
If this function is activated, these cooking zones will be
subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off
Switch on power
Press the cooking zone selection button.
Press the [—] button and then the [+] button
until P
Switch off Power
Press on the [—] button
Management of maximum power:
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power setting on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
If simultaneous cooking is taking place on the 2 zones, the
power of 3700 W is divided between these 2 zones.
Cooking zone
Front
Back
Power limit
Selected cooking zone with Power function
Power limit activated
symbol will flash
[9] reduced to [8] and flashes

4.1.6 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
. The
H
Setting or changing the cooking time
Press the cooking zone selection button
Press [—] and [+] at the same time.
Select the timer
Press [—] and [+] at the same time.
Reduce the time
Press [—] on the timer
Increase the time
Press [+] on the timer
A point next to the power level display of the selected zone
lights up to show the activation of the timer.
The time has been selected and the countdown has begun.
Display
Select the timer
Press the cooking zone selection button
P
Press [—] and [+] at the same time.
Stop the timer
9‐0
Keep pressing [—] on the timer until the timer
displays
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
– 55 –
in cm
Power (W)
Ø 17,5
Normal: 1400
Ø 21
Normal: 2300
Power: 3000
Timer function
Switch off the timer function
00
Display
P
8
Display
.
1‐P
00
30‐
29...
01‐
02...
Display
The lamp
.
for that zone
lights up
00