Tools And Materials - BestWater Jungbrunnen 22-00 ULTIMATE Gebrauchsanleitung

Setting Up and Connecting
EN

Tools and materials

You will require the following tools and
materials to install the water filtration
system:
Drill
●
Drill bits: 3 mm, 7 mm and 12 mm
●
Screwdriver (Phillips-tip)
●
Sockets, box wrench
●
Round file
●
For stone sinks (marble, granite etc.)
please observe the relevant drilling inst-
ructions. If additional additional finishing
work is necessary, use specialist tools for
this purpose.
The quick connects
You must be able to install and remove
the hose into/from the respective quick
connects on the side of the system in or-
der to properly connect and disconnect
the Jungbrunnen 22-00 Ultimate to/from
the water supply.
Use the images below for assistance and
orientation during this process.
Now push the hose until it clicks (approx.
1 cm).
The quick connect will fasten the hose so
that it cannot be pulled out unintentio-
nally.
48
In order to remove the hose from the
quick connect you have to push the con-
nector ring toward the front face of the
connector, fasten the ring tightly, and
pull it out from the hose. The quick con-
nect can always be reused.
Water may leak out from the BestWater
system if the plastic hoses are not pro-
perly installed into the quick connects.
1. Remove
security ring
2. Push back the
coupling ring
3. Remove
hose