BestWater Jungbrunnen 22-00 ULTIMATE Gebrauchsanleitung Seite 65

Open the tap on the stored pressure tank if the disinfection-
module is installed
After approx. 40 min. you must drain all
of the water through the faucet. Wait
long enough that the water starts to tri-
ckle slowly out of the faucet.
Turn on the designer faucet
Now you can remove the disinfection
module. While removing it, purified wa-
ter that is currently being processed may
pour out.
Close the tap on the stored pressure tank an remove the
desinfection modul
Insert the plastic hose back into the stop-
cock of the stored pressure tank.
Maintaining the BestWater System
Install the hose in the shut-off valve of the reservoir
pressure tank
Fill the reservoir again and let the water
drain completely through the faucet one
more time.
Open the tap on the stored pressure tank
Your annual filter change is now comple-
te and you can operate the unit normally
again.
The disinfection module itself has no
specific flow direction and its shape may
differ from the image.
EN
65