Technical Info - BestWater Jungbrunnen 22-00 ULTIMATE Gebrauchsanleitung

Technical Info

EN
Jungbrunnen 22-00
Height x width x depth
Weight
Minimum water flow pressure
Maximum water flow pressure
Water production in 24 hours
Water production per minute
Permeate-retentate ratio
Untreated water consumption/min.
Water connection
Tap water requirements
Minimum water flow pressure
Maximum water flow pressure
Water temperature
pH value
Iron content
Salt content
Stored pressure tank
Height
Diameter
Volume capacity
Outgoing pressure
Connection
Initial pressure (without water)
* The flow pressure must be at least 3 bar and may not exceed 7.0 bar of overpressure. If
the pressure is greater than 7.0 bar of overpressure, a pressure reduction valve must be
installed.
** The consumption data may deviate from the values above depending on water pres-
sure, water hardness, water flow temperature, and room temperature.
If these values or tolerances are exceeded or not reached, this may damage the BestWa-
ter system. A loss of warranty cannot be ruled out.
70
460 mm x 300 mm x 140 mm
approx. 5.4 kg
3 bar*
7.0 bar*
150 litres**
0.1 litres**
1:2.5**
approx. 0.4 litres**
3/4"
3 bar*
7.0 bar*
4.4 °C - 40.5 °C
6.5 to 9.5
< 0.2 mg/l
< 2,000 ppm
330 mm
230 mm
approx. 5 l**
0.4 - 3.5 bar**
1/4"-JG quick connectors
0.35 - 0.5 bar