Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 68

Seat positioning
Poor work posture will tire the operator and could lead
to mistakes being made; therefore, before starting work,
adjust the seat and secure it in the position that offers
maximum comfort.
Proceed as outlined below.
1) Loosen the screws (A) and adjust the seat height.
2) Tighten the screws (A) to secure the seat in the right
position.
3) Loosen the nut (B) to move the seat lengthways in
relation to the vehicle.
4) Tighten the nut (B) to secure the seat in the right po-
sition.
Planting procedure
The seedlings must be planted in soil which has been
finely tilled with a harrow or hoeing machine and lightly
compacted on the surface.
Do not load any seedlings into the dispenser that have
the root ball (or parts of it) missing as these will not be
planted properly.
We recommend you dampen the root ball well (but with-
C
A
UN41 0225DH
English language
INFORMATION FOR USE
B
UN41 0151DH
out causing dripping) to help the dispenser plant the
seedling and ensure the plant is more likely to take root.
Do not work on extremely spongy spoil, or extremely
compact soil, nor on very wet ground, as these condi-
tions would all affect planting quality negatively.
During planting, the work vehicle's driving wheels must
grip the ground at all times and the tractor lift must be
fully lowered.
G
E
26
6
B
A
D
F
B
H
Use and maintenance