Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 65

Adjusting the automatic safety release function
UN41 0216DH
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er or ejector jams).
The device, installed on every planting unit, is already set
by the manufacturer during the testing stage, but can be
adjusted by the user according to requirements.
English language
ADJUSTMENT INFORMATION
A
For adjustments, proceed as outlined below.
1) Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
2) Turn the ring nut (A) anticlockwise to decrease the
release resistance (i.e. more sensitive).
23
5
Use and maintenance