Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 58

Planting depth adjustment
Proceed as outlined below.
1) Use the lock (A) to release the knob.
2) Turn the knob (B) to increase or decrease the depth
of the furrow.
3) After adjustment secure the knob (B) with the lock
(A).
Carry out the same operations to adjust the furrow depth
of the other units installed.
Adjusting the small wheel load and position
To adjust the small wheel load proceed as outlined be-
low.
1) Turn the knob (A) clockwise or anticlockwise to in-
crease or decrease the load of the small wheel (B) on
the ground.
Carry out the same operations to adjust the load of the
small wheel of the other planting units installed.
To adjust the position of the small wheel compared to
the ploughshare proceed as outlined below.
1) Loosen the nuts (A).
2) Slide the small wheel along the support (B) until the
required position is reached.
3) Tighten the nuts (A).
Carry out the same operations to adjust the position of
the small wheel of the other planting units installed.
English language
ADJUSTMENT INFORMATION
A
UN41-0208DH
UN41-0209DH
UN41-0210DH
16
B
A
B
A
Use and maintenance
5
B