Mitsubishi Heavy Industries Mr. SLIMPSA-M KA-Serie Installationshandbuch Seite 15

6. Electrical work
Administrator password
Enter administrator password
Change administrator password.
Select:
Cursor
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
Full mode (Example)
Full
B&W inversion
Select:
Cursor
Room
Cool
Mode
Clock
Temperature
Room temp.
Auto mode
Backlight
Select:
Cursor
0000
Auto
Cool Set temp.
Mode Temp. Fan
Basic mode (Example)
Main display
/Basic
Yes / No
Cursor
Fri
Set temp. Auto
Temp. Fan
Clock display
Yes AM12:00
°C/°F/1°C
Yes / No
Yes / No
30 sec
Change
(4) Administrator password setting
[Button operation]
1 A window to enter a new password will appear. Enter a new password, and press
the SELECT button.
2 Press the F4 button (OK) on the password change confirmation screen to save
the change. Press the F3 button (Cancel) to cancel the change.
Note:
The initial administrator password is "0000." Change the default password as
necessary to prevent unauthorized access. Have the password available for those
who need it.
Note:
If you forget your administrator password, you can initialize the password to the
default password "0000" by pressing and holding the F1 button for ten seconds on
the administrator password setting screen.
Note:
The administrator password is required to make the settings for the following items.
• Timer setting · Weekly timer setting · Energy-save setting
• Outdoor unit silent mode setting · Restriction setting
• Night setback setting · Initial setting
Refer to the indoor unit operation manual for information about how to make the
settings.
Display setting menu
(1) Main display setting
[Button operation]
Fri
Move the cursor to "Full/Basic," and use the F3 or F4 button to select the display
mode "Full" or "Basic." (The factory setting is "Full.")
(2) Black and white inversion setting
Move the cursor to "B&W inversion" and use the F3 or F4 button to select the display
mode "Yes" or "No." (The factory setting is "No.") Selecting "Yes" will invert the colors
of the display, turning white background to black and black characters to white as
shown at left.
(3) Controller display details setting
Make the settings for the controller-related items as necessary.
Press the SELECT button to save the changes.
en
13