GOK BHK 052 OPSO Montage- Und Bedienungsanleitung Seite 26

START-UP OPSO / UPSO AND RESTARTING OPSO, OPSO / UPSO
7. Turn the protective cap
onto the spindle
8. Pull out the spindle
clicks into place and OPSO or OPSO / UPSO remains open.
Observe
9. Screw the protective cap
10. OPSO or OPSO / UPSO is ready to operate  and the display is GREEN.
11. Carry out LEAK CHECK.
26 / 182
/ around, slide the release device
.
with the release device
page 27.
/ on again by hand.
Behälterregler-Kombination PS 25 bar
6.
6. Unscrew the protective cap
or (OPSO / UPSO)
8.
until the spindle
(OPSO)
by hand.
9.
Artikel-Nr. 05 288 50 m