Displaying The Alarm Time; Pair Outdoor Sensor Again; Exporting Data; A) Registration - Eurochron EFWS 260 Bedienungsanleitung

c) Displaying the alarm time
In normal display mode, press the ALARM button to display the alarm time.

13. Pair outdoor sensor again

If the weather station is not receiving a signal from the outdoor sensor, perform the following
steps:
• To re-register, the outdoor sensor must be located approx. 2 - 3 m from the weather station.
• Press and hold the + (6) and – buttons (7) for approx. 5 seconds. The signal strength indicator
(M) flashes.
• Do not press any key until the outdoor temperature is displayed on the weather station.
Otherwise, search mode will be cancelled.

14. Exporting data

a) Registration

Measurement data may be exported to the following three online weather services:
• Weather Underground (wunderground.com)
• WeatherBug community (weatherbug.com)
- Registration link: pws.ensb.us
• Weather Cloud (weathercloud.net)
These online weather services provide information on current weather conditions that in part are
provided by private users.
If you want contribute, you need to create an account on the website of the online weather
service and register your weather station.
After successful registration, you will receive a user ID, password and a station number if
applicable.
34