Use With A Daw; Using Ableton Live - Omnitronic Key-288+ Bedienungsanleitung

8 Use with a DAW

8.1 Using Ableton Live

With Ableton Live installed, get your controller connected to USB port on your Mac or PC using the USB
cable provided and it will be automatically detected and enter Session mode. If you press the SHIFT button
on your controller the pads will be lighting as shown in the picture below. The first 2 pads of the top row are
used to select pad behavior and the last pad is for selecting knob behavior.
If your controller is not automatically detected in Ableton Live, you'll need to configure Live's Control Surface
Preferences. This could be done in the 'Link/MIDI' Preferences menu in Ableton Live.
Windows: Options > Preferences > Link/MIDI
Mac: Live > Preferences > Link/MIDI
You need to make settings in the Link/MIDI tab as steps shown below.
1) First, select the Launchkey Mini MK3 from the Control Surface menu.
2) Second, select OMNITRONIC KEY-288+ (Windows) for Input and Output settings. Finally, match the
Track, Sync and Remote settings.
KEY-288+ KEY-288+
37 • EN