Designation Of The Parts - Heiniger Trimmer StyleMidi Bedienungsanleitung

Specifications according to Machinery Directive 2006/42/EC
A-weighted emission sound pressure level at workstations at a distance of
pA
1 m, L ≤ 70 dBA
measured maximum noise emission value, including uncertainty of measure-
ment according to EN ISO 4871. Determination of the values according to
EN 60704-2-9 with reference to EN 60704-1
Vibration total value to which the hand-arm system is subjected,
2
a h < 3.96 m/s
measured maximum vibration total value including uncertainty of measurement.
Determination of the values according to EN ISO 5349-1/2

Designation of the Parts

1 On/Off switch with LED for indica-
tion of charging state
2 Cutting-length lever
3 Cutter head
4 Cleaning brush
5 Oil bottle
6 Comb attachment (x5)
7 Accessory holder
8 Charging station
9 Charge contacts in charging sta-
tion
10 Port in the appliance
11 Charge contacts of the appliance
12 Release key
13 Mains plug adapter (replaceable,
figure: EURO version)
14 Connecting cable
15 Power supply unit (model C20)
16 Port in the charging station
3 Preparation
3.1 Changing the mains plug adapter
The appliance is supplied with a mains plug adapter 13. Other mains plug adapt-
ers can be ordered from the customer service centre (see service address on the
back of these user instructions).
WARNING!
Use only the original mains plug adapters 13.
Pull the power supply unit 15 out of the power socket before you
change the mains plug adapter 13.
NOTE: ensure that you do not bend the small pins on the power supply unit 15.
1. Hold down the release key 12 while pulling off the
mounted mains plug adapter 13.
2. Insert the required mains plug adapter 13 into the
power supply unit 15. Ensure that the release
key 12 is located at the top and audibly clicks into
place.
ENGLISH 19