Packaging; Storage; Operation; Requirements At The Place Of Use - Heiniger Xpert/C Originalbetriebsanleitung

5.2

Packaging

For the packaging, just non-polluting material is being used.
The return of the packaging saves raw materials and reduces the volume
of waste. Dispose of packaging materials that are no longer needed in
accordance with locally applicable regulations.
5.3

Storage

Store shearing machine and accessories on the following conditions:
Do not store outdoor.
X
Store dry and dust-free.
X
Protect against solar irradiation.
X
Avoid mechanical shocks.
X
Storage temperature: 0 until 40°C.
X
Relative humidity: max. 90 %.
X
When storing longer than 3 months, check periodically the general
X
condition of all parts.
When not using the shearing machine, store it in the case making sure it
X
is well cleaned, lubricated and that the clipping elements are not spring
loaded (risk of corrosion).
6

Operation

6.1

Requirements at the place of use

Observe the manual (see chapter 3 Technical data).
X
Power outlets in the outer area must be equipped with a residual current
X
circuit breaker (FI).
The work place must have adequate lighting.
X
The electrical socket must be easily accessible so that the device can be
X
quickly disconnected from the mains.
The charger power cord must not be taut or kinked.
X
Make sure there is adequate ventilation.
X
6.2

Adjusting the clipping pressure

Set the clipping pressure as follows before you start clipping:
Fig. 3
Translation of the original instructions / Sheep shearing machine Xpert
Before beginning shearing when
X
the machine is switched off, check
to make sure that the tapered pins
of the chicken feet exactly engage
in the positioning holes of the upper
blade.
Turn the adjusting knob in the
X
direction of the arrow until you feel
resistance.
Turn the knob another 1/4 turn in the
X
direction of the arrow.
11