5.2
Logic input
Function of the
logic input
Level inhibit
Minimum/maximum
value reset
Hold
Symbol
Notes
C117
Function of the logic input
On Type 951530/... the logic output will be deactivated automatically (double assignment).
Access to the parameter and configura-
tion levels is possible.
Values are determined.
No updating of "Hold" value,
actual value is updated.
Access to the parameter and configura-
tion levels is not possible.
Values are reset.
The present measured value is stored
and the display "frozen".
Measurement (incl. limit monitoring)
carries on in the background.
If, with activated "Hold" function, an
over/undershoot or a limit infringement
occurs, this will be indicated by a
blinking display.
vPage 21
15