Functions - JUMO di 32 Betriebsanleitung

5

Functions

The following procedure is recommended:
h Familiarize yourself with the instrument functions
h Enter the configuration codes and parameter values in the tables provided for this purpose
in Chapter 6. Note down the values (
The parameter and configuration codes are listed in the order of their appearance. Irrelevant
parameters are masked out (see table below).
h Enter the configuration codes and the parameters on the instrument.
Masking out irrelevant parameters
Configuration
Thermocouple
Resistance thermometer
Potentiometer
Resistance thermometer
Resistance transmitter
Potentiometer
Standard signal
Thermocouple
Resistance thermometer
Potentiometer
Standard signal
), or mark the selection with a cross (
Masking out the parameters for
Standard signal scaling
Thermocouple
Resistance transmitter
).
X
Parameter
,
SCL SCH
,
C119 CJt
rA, rS, rE
12