JUMO di 32 Betriebsanleitung Seite 46

Normal display
The display shows the measurement.
Operating level
At the operating level, additional measurements can be indicated. The minimum and maximum
values become available by programming the parameter C115. Programming the parameter C117
additionally produces the "Hold" value.
Programming the parameter C115 will enable you to obtain an alternating automatic display of
the minimum and maximum values and the "Hold" value (scroll function), if available. If the scroll
function is activated, there will be no further distinction between normal display and operating
level.
Parameter level
The limit values of up to two limit comparators and the filter time constant can be programmed
here.
The display alternates between showing the parameter symbol and the parameter value.
Display
LO
HI
HOLd
InP1
Meaning
Minimum value
Maximum value
"Hold" value
Measurement
10